Słuchawki bezprzewodowe Optoma NuForce BE6 (Wireless headphones)


Witajcie. (Hi)

Dziś przedstawiam Wam słuchawki bezprzewodowe od firmy Optoma. (Today I present to you the wireless headphones from Optoma)

Kilka słów od producenta na temat swojego produktu (A few words from the company about his product)

„This wireless model gives audio enthusiasts a cordless experience without compromising on sound quality. The BE6 is the only Bluetooth® in-ear headphones to be fully crafted from aluminium, which provides crystal-clear sound and elegant design in a lightweight form-factor, making them durable and attractive for all lifestyles. In addition, the headphones feature Bluetooth with aptX® and AAC compatibility, for the ultimate quality in audio streaming”

Tak prezentuje się pudełko. (So looks the box)

IMG_6301 IMG_6302 IMG_6303

Po wyglądzie pudełka widać, że mamy do czynienia z produktem z trochę „wyższej półki”. (After the box you can see that we are dealing with a product with a little „higher end”.)

IMG_6304

IMG_6305

IMG_6306

Zawartość pudełka: (Contents of the box)

Słuchawki (Headphone)

Pokrowiec (Case)

Instrukcja obsługi (User manual)

IMG_6307

Szczegóły instrukcji obsługi. (Details of the manual.)

IMG_6308

IMG_6337 IMG_6338

IMG_6339

IMG_6340

IMG_6341

IMG_6342

IMG_6343

IMG_6344

Pokrowiec jak widać zebrał trochę kurzu, włosów i sierści 🙂 (Case gathered some dust, hair 🙂 )

Jest na pewno trwalszy niż dodawane do innych słuchawek woreczki. (It is certainly more durable than added to other handsets bags.)

Można go również gdzieś sobie przywiesić przy pomocy dodatkowego kółeczka. (It can also be somewhere a fasten with additional wheels.)

IMG_6309 IMG_6310 IMG_6311

W środku znajdowały się dodatkowe wymienne gumki do słuchawek. (In the middle there were additional replaceable rubber to the headphones.)

IMG_6323

Parametry techniczne (Technical parameters):

Długość kabla (Cable length) – 561 mm

Obsługiwane kodeki (Supported codecs) – HSP 1.2, HFP 1.6, A2DP 1.2, AVRCP 1.4 , APT-X, AAC

Zakres pracy (Operating range) – 30 metrów (meters)

Przetwornik akustyczny Aacoustic transducer) – 10mm (opatentowany,patent)

Impedancja (Impedance) (Ohm) – 20

Pasmo przenoszenia (Frequency response) – 20Hz – 20kHz

Czułość (Sensitivity) (dB) – 95 +/-3 at 1KHz

Waga (Weight) (kg) – 0.016

Zasilanie (Power supply) – Akumulator litowo-jonowy, cylindryczny, 3,7V / 80mAh (Lithium-ion battery, Cylindrical Type, Typical 3.7V/80mAh)

Pobór mocy (Power consumption) – 15mA w trybie A2DP, wyjście głośnika 75 dB SPL (15mA at A2DP mode, speaker output 75dB SPL)

Połączenia wejściowe (Connections input) – Bluetooth V4.0+EDR

Żywotność baterii (Battery life) – Do 6 godzin (6 hours)

Urządzeń zapamiętanych (Devices memorised) – 8

techfeature1

Opis technologi i materiałów jakich użył producent (Description of the technology and the materials he used producer:):

„The BE6 large driver eliminates unwanted reverberations by using a high-grade titanium, magnesium and inert metal that is used to form a thin nano-layer over its surface. This precise mixture, along with the help of a circumferential copper ring, allows the driver to maintain optimal structural integrity for distortion-free sound even at high volume levels.The patented driver selected for the BE6 is designed to maintain a constantly accurate impedance curve, resulting in improved sound quality from any source. This has the added benefit of extending battery life.

The latest Bluetooth technology offers faster connection and superior bandwidth. aptX will transfer content at up to CD quality sound between source and BE6 resulting in greater separation between channels, improved imaging and the elimination of transmission error. aptX is fully compatible with all other previous Bluetooth versions.

To further enhance the sound quality AAC processing is used to increase the sound quality of lower resolution audio tracks from the likes of iTunes, YouTube, DAB radio transmission and online streaming services.”

Słuchawek można używać ze wszystkim urządzeniami (Apple, Android, Windows), które posiadają Bluetooth 4.0. (Headphones can be used with all devices (Apple, Android, Windows) that have Bluetooth 4.0.)
IMG_6312W zestawie gumek znajdują się takiej jak (The set includes rubber bands such as):

2 pary (pairs) Comply douszne w rozmiarze (earbuds size) M, L.

4 pary (pairs) silikonowych dousznych w rozmiarze (earbuds size) XS, S, M, L.

Silikonowe gumki z dodatkowymi haczykami czyli tak zwane (Silicone rubber with additional hooks the so-called) EarHooks.IMG_6324 IMG_6325 IMG_6326 IMG_6327 IMG_6328Wszystkie wersje gumek na słuchawce. (All versions of the rubber on the handset.)

EarHooks + Silikonowe (Silicone)

Można oczywiście używać ich też z wersją Comply. (Of course you can also use them with the version Comply.)IMG_6329 IMG_6330 IMG_6331 IMG_6332Gumka (Rubber) ComplyIMG_6333 IMG_6334 IMG_6335Gumki silikonowe (Rubber silicone)

IMG_6316 IMG_6321

Pilot do sterowania głośnością, przełączania utworów, wł/wył, parowania oraz dioda. (Remote control for volume, switch tracks, on / off, pairing and LED.)

IMG_6313

Mikrofon w pilocie. (Microphone in the remote control)

IMG_6314

Gniazdo do ładowania poprzez kabel micro USB. (Socket for charging via micro USB cable.)

IMG_6315

IMG_6322

Gdy ładujemy nasze słuchawki kolor diody zmienia się na czerwony. (When we charge our headphones color LED turns red.)

IMG_6336

Podczas działania słuchawek miga dioda w kolorze niebieskim. (During the operation of the headphone LED blinking blue.)

IMG_6283

Słuchawki posiadają magnesy na końcach, które pomagają w ich złożeniu. (Headphones have magnets at the ends, which help in their submission.)

IMG_6317

Słuchawka bez gumek oraz z logiem NU w tylnej części. (The handset without rabber and logo NU in the rear.)IMG_6319 IMG_6320

Możliwa regulacja długości kabla. (You can adjust the length of the cable.)

Kabel jest płaski i nie plącze się. (The cable is flat and does not get entangled)

IMG_6318

 Poniżej słuchawki w moich uszach 🙂 (Below the headphones in my ears 🙂 )

Jak widać dość mocno odstają od uszu ale nie powinno to nikogo dziwić, w końcu są tam wbudowane baterie, które swoje miejsce muszą zajmować w obudowie. (As you can see quite stand out from the ears but this should not surprise anyone, in the end there are built-in batteries, which must take place in the housing.)

IMG_6626IMG_6625
IMG_6627
IMG_6511

Na jednym ładowaniu posłuchamy muzyki przez około 5 godzin. (On a single charge we listen to music for about 5 hours.)

Czas ładowania słuchawek to około 2 godziny. (Charge time headphones is about 2 hours.)

Słuchawki są również dostępne w kolorze Space Gray. (The headphones are also available in the color Space Gray.)

BE6-100-9

BE6-100-12

Podsumowując słuchawki są wygodne w gumkach silikonowych ale zdecydowanie najbardziej w Comply.

Najlepiej trzymają się w uszach w EarHoox’ach.

Wszystkie wersje gumek bardzo dobrze wygłuszają od zewnętrznego otoczenia przy głośności ustawionej na mniej więcej połowę mocy.

Brzmienie jest bardzo czyste zarówno w niskich jak i wysokich tonach, oczywiście jak na słuchawki bezprzewodowe.

Wszystkie przyciski bardzo dobrze działają z odpowiednim wyczuwalnym uskokiem.

W czasie rozmowy telefonicznej nasz głos przez mikrofon jest bardzo dobrze słyszalny, nawet w głośniejszym otoczeniu.

Rozmówce również słyszymy bardzo wyraźnie.

Wykonanie stoi na wysokim poziomie, co widać już przy rozpakowywaniu ich z pudełka, a kończąc na samym wyglądzie słuchawek, a także akcesoriów do nich dodanych.

Materiały użyte do ich wytworzenia zapewniają komfortowe i trwałe korzystanie z nich przez długi czas.

Jedyne co może komuś przeszkadzać to ich wielkość i to jak bardzo odstają od uszu.

Mi to akurat nie przeszkadzało.

Pewnie zaczęłoby by bardziej gdybym chciał ich używać z czapką na głowie 🙂

Można rozwiązać ten problem używając kaptura zamiast czapki 🙂

 Regulacja długości kabla zapewnia komfort i bezpieczeństwo podczas korzystania.

Pokrowiec jest solidny i daję odpowiednią ochronę.

Słuchawki zdecydowanie polecam osobą, które nie lubią plątaniny kabli, ładnego solidnego wykonania, dobrego brzmienia zarówno podczas rozmowy telefonicznej jak i w czasie słuchania muzyki.

(Summing up the headphones are comfortable erasers silicone but by far the most in the Comply.

The best stick in the ears of EarHoox’ach.

All versions of rubber bands very well to mask the external environment with the volume set at about half power.

The sound is very clean in both the low and high tones, of course, like wireless headphones.

All buttons work very well with the appropriate perceptible gap.

During the phone call, our voice by microphone is very well heard, even in louder environments.

Interlocutor also hear very clearly.

Execution is high, as is already evident when extracting them from the box and ending with the appearance of headphones and their accessories added.

The materials used in their producer provide a comfortable and durable to use them for a long time.

The only thing that may disturb someone their size and how much it stand out from the ears.

To me it just did not bother.

Probably it would start to be more if I wanted to use them with a hat on his head 🙂

You can solve this problem using the hood instead of hats 🙂

 Adjusting the length of the cable provides comfort and safety during use.

Cover reliable and give adequate protection.

Headphones definitely recommend a person that does not like clutter, a pretty solid performance, good sound, both during the call and when listening to music.)

Oficjalna strona produktu (The official product page): Optoma NuForce BE6

Cena w Amazonie (Price at Amazon): 119 $

Link do zakupu w Amazonie (Link to purchase at Amazon): Kup (Buy) Optoma NuForce BE6

CENEO

Dziękuje Panu Szymonowi Łuska z firmy AB za udostępnienie sprzętu do przetestowania 🙂

Pozdrawiam do następnego iTestu 🙂 (Regards to the next iTest 🙂 )